Quote:
Originally Posted by mrhino
I used Brendan from LT1 swap. his web site was so full of information that I decide to do my own harness. it was relatively easy just took a little time and a quite place to think. Saved my self a bunch of money I could use for other things. (I think I spent about $6 dollars for a odb2 port, relays and a few terminals). Brendan also reprogrammed my PCM for $75 to all the things I was using and removed what I wasn't including, MAF. plus I sent it to him the PCM and he returned it the next day. I couldn't believe how fast he was. He also supplied me with some tech support. It is nice since of accomplishment knowing I did the harness and if I ever have problems I should be able to figure them out myself, but if not, I know Brendan will help me out.
check out his website. http://lt1swap.com/index.htm |
So I just read through most of his site, and you are right, there is a ton of info. Almost enough for me to start thinking I could do this myself. Probably enough for me to mess it up really bad.
He does really break it down to seem fairly simple, I've just never done much wiring, other than stereo stuff. I think I will email him and see if he can give me enough confidence to try to tackle it myself. That would definitely save me some cash.