Re: 66 c-10 rear tranny crossmember
he more than likely has a car 3 spd in there with the rear trans mount attached (perhaps installed by a PO) to it and thinks that there should be a crossmember there. 3 speed truck trans did not have a rear trans mount in these years as they mounted at the bellhousing and the trans was suspended out there with nothing under it
he didn't have an a/trans in it; just that the holes are there in the frame for the a/t crossmember. the bellhousing c/member from 63 and up was eliminated with a/t as they used alum a/t housings starting then and went to a rear trans mount with those trans
ron
Last edited by padresag; 10-26-2010 at 08:50 PM.
|