The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cdowns · 06-15-2003, 09:02 PM

don't use WD-40 on rubber seals it causes them to deteriate to lubricate a rubber seal it's best to use dishsoap but if it's the original grommet it will probably need to be cut off if it's all hard and cracked , if it's not cracked and hard hot water and the soap should loosen it up enough to pry it out of the hole and off the filler neck . DO NOT START HITTING THE FILLER NECK WITH A HAMMER!!!!

06-15-2003, 09:02 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	don't use WD-40 on rubber seals it causes them to deteriate to lubricate a rubber seal it's best to use dishsoap but if it's the original grommet it will probably need to be cut off if it's all hard and cracked , if it's not cracked and hard hot water and the soap should loosen it up enough to pry it out of the hole and off the filler neck . DO NOT START HITTING THE FILLER NECK WITH A HAMMER!!!! __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY