The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Alex Hayley · 11-05-2010, 10:46 AM

I had the same problem. No tubes. Instead of trying to track them down from where I bought the mounts, I went to Ace Hardware and bought some tubes in the hardware section and cut them to the length of the original rusted tube. A few caveats: you still have the original tube, the 67 (I have a 72) uses a tube that is the same diameter as what you can find at a hardware store. Hope this helps. I can try to get a measurement of the length needed when I get home.

11-05-2010, 10:46 AM	#6
Alex Hayley Registered User Join Date: Jul 2000 Location: NC Posts: 987	Re: Cab mount tube length I had the same problem. No tubes. Instead of trying to track them down from where I bought the mounts, I went to Ace Hardware and bought some tubes in the hardware section and cut them to the length of the original rusted tube. A few caveats: you still have the original tube, the 67 (I have a 72) uses a tube that is the same diameter as what you can find at a hardware store. Hope this helps. I can try to get a measurement of the length needed when I get home.