The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*mrhino* · 11-15-2010, 12:18 PM

put a jack under the A arms, loosen the ball joint nuts (dont take off) smack the spindle with a hammer were the ball joint fits in till it comes loose then remove the nut and lower the jack slowly and the spring should drop out.

11-15-2010, 12:18 PM	#8
mrhino Account Suspended Join Date: Aug 2007 Location: USA Posts: 1,223	Re: Project Slomo put a jack under the A arms, loosen the ball joint nuts (dont take off) smack the spindle with a hammer were the ball joint fits in till it comes loose then remove the nut and lower the jack slowly and the spring should drop out.