Quote:
Originally Posted by jonzcustomshop
|
Quote:
Originally Posted by andyh1956
ok found some info. it seems it is CONVERTED GAS ENGINE.
GMC V6 engine
From Wikipedia, the free encyclopedia
Jump to: navigation, search
GMC Truck produced a unique 60° V6 engine from 1960 through 1978. The engine was available in 305, 351, 401 and 478-cubic-inch (5.0, 5.8, 6.6, and 7.8 L) versions. In late production there was also a 432-cubic-inch (7.1 L) version with enlarged crankshaft journals. GMC also made a 637-cubic-inch (10.4 L) 60° V8 with twin balance shafts using the same general layout as the 305. Finally, there was a 702-cubic-inch (11.5 L) "Twin Six" V12, which was basically two 351s placed end-to-end with a common block and crank. A Diesel version was called the ToroFlow.
|
Quote:
Originally Posted by andyh1956
ok here is a link to a photo post of a toro flow outta the truck - you can see it good. the intakes are on the outside of the heads where you would normally see the exhaust manifolds. what kinda drugs do you have to take to dream something like this up?
http://rides.webshots.com/album/549527781CWBNyJ |
my link at the top has some good pics, and description.