Quote:
Originally Posted by Critter
If you don't mind answering a question, what is the difference in distance between the sm465 and nv4500 as far as the front of the bell housing to the shifter location? In other words, if you left the engine in the same location how much further back would the shifter be?
|
Thanks!
The depth is the same on both the stock bell housing and the AA bell housing. From measuring from the front of the transmission case to center of the shifter on the NP465 is 6” and 9.5” on the NV4500. So, it looks like the shifter hole to be bored into the automatic turtle shell will be reward 3.5”
This kinda give you an idea. The front of the two trans are equal albeit the 465 is tiled back a tag on the jack.