Quote:
Originally Posted by Mike J
I always hear that you have to trim the arms - but Im running 2.5" drop spindles and 3" drop springs with stock arms and 15x7 steel wheels and didnt have to trim anything and dont rub on anything (granted I dont have inner fenderwells) so I guess it's not always the case.
|
With 15" wheels,... it's all about the backspacing.
You can run a 15x7, 15x8, 15x10 and not rub a
stock lower control arm,... as long as the wheel has approximately 3.5" of backspacing.
And with that said,... now you need to look at what's going to rub the fender lip.
Bigger diameter wheels can run
more backspacing.