The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1970 C10 and C20 Leaf Spring U-bolt Difference?

**jerry moss** · 06-22-2003, 10:01 PM

the 3/4 ton ones are 5/8 inch and you can get them at your local napa store, i've bought a few sets over the years.
the 1/2 ton 2wds are smaller diameter, not sure if they're 1/2 or 7/16.
in case either of you need the plates, i have one set of each for 2wd trucks

06-22-2003, 10:01 PM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,960	the 3/4 ton ones are 5/8 inch and you can get them at your local napa store, i've bought a few sets over the years. the 1/2 ton 2wds are smaller diameter, not sure if they're 1/2 or 7/16. in case either of you need the plates, i have one set of each for 2wd trucks __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA