The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Will S-10 SBC headers fit our trucks?

S10Fan · 12-12-2010, 07:01 AM

Take a good look at the driver side header (S-10) and measure the clearance between the motor and steering shaft. On the S-10 the steering shaft runs through the header so the header is designed with clearance. That kick out might cause a problem on a C-10.

I have a V-8 S-10 but my C-10 is a big block so I can't really eyeball it for you.

12-12-2010, 07:01 AM	#4
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,643	Re: Will S-10 SBC headers fit our trucks? Take a good look at the driver side header (S-10) and measure the clearance between the motor and steering shaft. On the S-10 the steering shaft runs through the header so the header is designed with clearance. That kick out might cause a problem on a C-10. I have a V-8 S-10 but my C-10 is a big block so I can't really eyeball it for you. __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.