Re: Project 67 DRGNWGN - 67 Burban!!
I was flippin thru post and decided to look at your's. one quick question, I noticed that you used the rubber gaskets in the front and back of your intake manifold, if this is true I would recomend that you remove them and use some RTV instead, I made that mistake less than a year ago and ruined my motor, the reason behind it is that they are to high to compress the gaskets between the intake and the heads, it causes a vacume and keeps all the oil in the upper end of the motor causing the lower end to run out of oil and burning up the bearings.
|