[neonlarry]

I did it on mine, it was a big job, but not really hard. You will need a new front panel (or make a spacer for it like I did) and you will need to replace the splash shields that go at the back of the wheel opening. You will have to completely disasemble the bed to do the swap. You pretty much just take the whole thing apart, and bolt the sides, wheel wells, and the front panel to the wood floor. So again, you will need a front panel, a metal floor, and the splash shields to do the job. Most lwb beds have at least 1 side damaged beyond repair, so if you are thinking about buying a whole new bed, you will probaby have to take it apart anyway. I had to rpelace one of my bedsides anyway, so that is part of why I did it the way I did.