|
Re: Cheap/Easy ways to make engine bay look better?
There are a lot of things that can be done on the cheap as others have mentioned, Small things go a long way in overall appearance.
Re-loom your under hood wire harness, Replace rusty or oversized hose clamps with the proper size. Clean/paint rusty screws and nuts, Rattle can anything that looks bad, Use news paper and masking tape to reduce over spray.
A nice clean/detailed engine bay can look just as good without a bunch of money or chrome bling, Add the bling after everything else is done.
When I judge shows 50% of my vote is based on the engine bay, That's where one's creativity out shines fancy wheels/tires and paint.
On Edit;
You have a camera, Take many pics of things before you take them off or apart for detailing....
__________________
93 Jeep XJ
88 Buick La Sabra
Toys;
88 TA-GTA in the works....
97 GMC Ext. Cab
502 Crate 5 Spd......Sucks Gas But Haulz Azz ! 
The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic.
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Last edited by Restrorob; 12-17-2010 at 07:16 PM.
|