Quote:
Originally Posted by chopped81step
....I've been searching the site & found i can run stock front shocks on the rear of my lowered truck? I have a flip kit on the rear with no "c" notch, I think it still has the stock length shocks on it & there bottomed out...
|
I'm not sure if that correct or not, but I wouldn't do it. If it were me, I would run a set of shock extenders and put longer shocks on. You need as much travel from the rear shock as you can get to dampen the load.
Regarding the "standard" gear ratio, all this is "assuming" the stock rear axle is still in place. Pull the cover as LONGHAIR suggested, and know for sure what you have in there.