The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**old Rusty C10** · 06-25-2003, 06:23 PM

the one goes to either the intake or the waterpump the other one goes to theradiator. When i did my motor swap on the 86 i had to take out the one in the waterpump and replace it with a 1/2 inch plug ( i had one in the extra waterpump i had ont he truck i had to put it int he waterpump on the new motor. Make sure uf ya plug up that hole ya put some teflon tape on the threads before ya seal it

06-25-2003, 06:23 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,345	the one goes to either the intake or the waterpump the other one goes to theradiator. When i did my motor swap on the 86 i had to take out the one in the waterpump and replace it with a 1/2 inch plug ( i had one in the extra waterpump i had ont he truck i had to put it int he waterpump on the new motor. Make sure uf ya plug up that hole ya put some teflon tape on the threads before ya seal it __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!