The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - NC 1967 Rear Axle (3.73) and Trailing Arms

brn agn · 12-30-2010, 10:10 PM

I have a rear axle and trailing arms from a 2WD 1967 short bed. It has an open carrier with 3.73 gears with 6 lug axles. The trailing arms will need to be cleaned up, but do not appear to be rusted through anywhere. $150 and this will need to be picked up locally in Youngsville, NC

Per board rules, please reply to this thread if you would like to purchase these items.

12-30-2010, 10:10 PM	#1
brn agn Registered User Join Date: Mar 2009 Location: Youngsville, NC Posts: 952	1967 Rear Axle (3.73) and Trailing Arms I have a rear axle and trailing arms from a 2WD 1967 short bed. It has an open carrier with 3.73 gears with 6 lug axles. The trailing arms will need to be cleaned up, but do not appear to be rusted through anywhere. $150 and this will need to be picked up locally in Youngsville, NC Per board rules, please reply to this thread if you would like to purchase these items. __________________ 1969 C10 SWB Project Charity Case AKA "Roscoe" 1971 Cheyenne Super A Combined Effort The Service Station-A practical ministry for those in need Last edited by brn agn; 12-30-2010 at 10:13 PM.