The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 383 Install update

INSIDIOUS '86 · 01-06-2011, 02:24 AM

Also I found that if you put a spring on the throttle valve cable in front of the plastic clip that attaches to the stud it will pull the cable out farther at part throttle an keep line pressure up to compensate for high of idle torque, and when you hit full throttle it will compress so as not to pull the cable to tight
Posted via Mobile Device

01-06-2011, 02:24 AM	#4
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: 383 Install update - 700R4 issues and vacuum brake issue Also I found that if you put a spring on the throttle valve cable in front of the plastic clip that attaches to the stud it will pull the cable out farther at part throttle an keep line pressure up to compensate for high of idle torque, and when you hit full throttle it will compress so as not to pull the cable to tight Posted via Mobile Device