The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Maxxd07 · 01-09-2011, 05:21 PM

It would depend on the condition of the frames of course but if it was me I would swap the 4x4 stuff onto the existing frame. Dieselwrencher has a nice write up in his build thread. He is converting a longhorn into a 4x4, this is the thread.

01-09-2011, 05:21 PM	#2
Maxxd07 Registered User Join Date: Sep 2010 Location: ND Posts: 520	Re: 4x4 conversion?? It would depend on the condition of the frames of course but if it was me I would swap the 4x4 stuff onto the existing frame. Dieselwrencher has a nice write up in his build thread. He is converting a longhorn into a 4x4, this is the thread. __________________ Name: Les ---------------------- Couple 80s Couple 70s One 68 Last edited by Maxxd07; 01-09-2011 at 05:29 PM.