The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Longhorn Man · 06-27-2003, 11:14 PM

If you have access to a plazma cutter, you could cut a small notch in the bracket. Just enough to clear a hose.
If you don't have access, a shop should be able to do it for 10 or 20 bucks.

06-27-2003, 11:14 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	If you have access to a plazma cutter, you could cut a small notch in the bracket. Just enough to clear a hose. If you don't have access, a shop should be able to do it for 10 or 20 bucks.