The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JimKshortstep4x4 · 01-13-2011, 08:24 PM

Lock Doc,

I have not seen any clamps on the shaft extension that could be adjusted on his year truck. The clamp bolt fits through the clamp and the groove that is cut into the shaft. The clamp bolt keys the clamp, shaft extension and the column shaft on the 72 truck that he has.

Jim

01-13-2011, 08:24 PM	#5
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: thrust play on steering shaft Lock Doc, I have not seen any clamps on the shaft extension that could be adjusted on his year truck. The clamp bolt fits through the clamp and the groove that is cut into the shaft. The clamp bolt keys the clamp, shaft extension and the column shaft on the 72 truck that he has. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC