Quote:
Originally Posted by lakeroadster
If you move the springs inward you will be putting a torsional load into the track arms, verses the stock design loading the track arm right over the web of the "I-beam" track arm. Consider changing the track arm bushings to poly and buying a track arm reinforcement kit, or look at some tubular track arms. A boxed structure handles torsion better than an I-beam.
|
Lake...... If i move the springs i will more than likely build new hangers up front under the frame rails and line the arms up parallel to the frame. I will then build a new crossmember for the springs to mount to. Essentially it will be similiar to a ladder bar setup. I won't be offsetting the springs from the arms. I am not fond of that either.