The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**john** · 07-03-2003, 05:15 PM

You will probably have less problems with fit if you call one of the board vendors and replace cab and support mounts at the same time. You will more likely get the right parts for your truck. If you replace just the support mounts you will probably have to shim the cab mounts anyhow. 1/4" is quite a bit. Good luck John

07-03-2003, 05:15 PM	#2
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	You will probably have less problems with fit if you call one of the board vendors and replace cab and support mounts at the same time. You will more likely get the right parts for your truck. If you replace just the support mounts you will probably have to shim the cab mounts anyhow. 1/4" is quite a bit. Good luck John __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/ Last edited by john; 07-03-2003 at 05:19 PM.