The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

75gmc454 · 02-06-2011, 10:35 PM

Thank you Tim for the time to take and post those pics. The two brackets in the bottom picture that bolt to the compressor are the ones that I am missing. I will save that picture and keep searching for some.

I have another question Tim. I am wondering about the engine mounts on this truck. Would only A/C trucks have that taller mount on the drivers side like the one that is shown in the top pic of post #55. The only problem with this is that the passenger side valve cover is very close to the firewall. But the A/C pulley is also very close to the front crossmember. Do you have any ideas?

--Clint

02-06-2011, 10:35 PM	#25
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: 67 gmc 4x4 Thank you Tim for the time to take and post those pics. The two brackets in the bottom picture that bolt to the compressor are the ones that I am missing. I will save that picture and keep searching for some. I have another question Tim. I am wondering about the engine mounts on this truck. Would only A/C trucks have that taller mount on the drivers side like the one that is shown in the top pic of post #55. The only problem with this is that the passenger side valve cover is very close to the firewall. But the A/C pulley is also very close to the front crossmember. Do you have any ideas? --Clint Last edited by 75gmc454; 02-06-2011 at 10:40 PM.