Re: coil over cross member with NEW spline sway bar
Here are some specs of our bolt in coil-over ifs for c-10 trucks.Keep in mind that are airbag version is differnt on the specs.This will also change on your tire dia as well.General specs and keep in mind all of our frontends are differnt in many ways.
1.The track we build these to is 62 1/2
2.Camber curve 1.750 this is at ride height to full compresed total suspension gets 6 inches of travel.
3.Bump steer 2 -2 1/2 degrees through travel of suspension
4.Scrub radius 2 1/16 at ride height
5.Roll center changes 1 13/16 this was all tested on a 28' tall tire.
Last edited by Scottshotrods; 02-08-2011 at 04:07 PM.
Reason: added
|