View Single Post
Old 02-16-2011, 11:46 PM   #3
duwem
Registered User
 
duwem's Avatar
 
Join Date: Oct 2010
Location: WI
Posts: 347
Re: 235 Starter Solenoid-not always engaging flywheel

Thanks for the info.

I will look at the ring gear teeth.

On the copper disk inside the solenoid. I see there are 2 skrews that hold the plastic end where the terminals are. I removed those screws and attempted to pull that cap off but it only moved a little bit, I didnt want to pull too hard because it seemed like I was pulling on wires. Do I just keep pulling to get it off?

Any idea what a new solenoid costs?


Thanks!
duwem is offline   Reply With Quote