The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

fatfords · 07-07-2003, 10:23 AM

On my '72 I used the brown/white wire for the TCS solenoid (solenoid removed by PO). Not sure if your -69 has the same circuit or not. The wire had a disconnect ~12" from the main firewall connector and was routed in the "gutter." The circuit shares a 4 amp fuse with the radio (stock) and has been working fine for several months. The solenoid doesn't pull that much current, but I would recommend protecting the wire with a fuse of some sort since it is a 12 V source.
Good Luck!

07-07-2003, 10:23 AM	#13
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	On my '72 I used the brown/white wire for the TCS solenoid (solenoid removed by PO). Not sure if your -69 has the same circuit or not. The wire had a disconnect ~12" from the main firewall connector and was routed in the "gutter." The circuit shares a 4 amp fuse with the radio (stock) and has been working fine for several months. The solenoid doesn't pull that much current, but I would recommend protecting the wire with a fuse of some sort since it is a 12 V source. Good Luck! __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab