The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dropped72shortbed · 03-27-2002, 08:53 PM

ok when i hooked up the timing light to that cylinder and flashed the little points on the balance no mark showed up. i turned off the truck and found the groove in the balancer.

so what gives? the marks completely not lined up with the little timing points. it seems to run pretty good so its not like it could be off that much. how do i go about finding out where the mark should be?

03-27-2002, 08:53 PM	#5
dropped72shortbed Registered User Join Date: Nov 2001 Posts: 303	ok when i hooked up the timing light to that cylinder and flashed the little points on the balance no mark showed up. i turned off the truck and found the groove in the balancer. so what gives? the marks completely not lined up with the little timing points. it seems to run pretty good so its not like it could be off that much. how do i go about finding out where the mark should be? __________________ Blake A. - Huntington Beach CA 72 c10 swb 5/5 drop, 350/350, partialy shaved, soon to be 5/7 on 20s.