Quote:
Originally Posted by Bugeyev8
My water pump is 2 inch as is the radiator, I use the exhaust preheater hose and form a shape that works and then go to the parts house and see, my issue is the parts houses here suck...and I have to drive 15 miles to the good one, will let you know what I find
|
The preheater hose is a good idea.
Quote:
Originally Posted by daverod
Looks like the lean to is going to be a good idea.  looks like it will last forever. What's the snow load 250lbs/psf  |
250 maybe
Quote:
Originally Posted by shortbed70
Looking good alan. How long you think till its mobile and drivable?
|
I'd like to fire it by summer. Thanks
Quote:
Originally Posted by towersddg9
Allan that top pic looks correct, those are sold as a pair and fit the outer fenders, I ordered both inner and outer fender seals, the inner comes as one piece and you cut to fit, on my 65 those outer fender seals had staples holding them on the fender looks like they may have pulled the wrong part
|
Is there any seals that hang down off the inner fender next to the frame rail? I didn't take good pics during teardown. Thanks
Decided to start welding on the fenders. They are a lot easier than the bedsides.
I used a Lincoln 135 gas welder that Shannon brought over. It welded really nice.
After welding
Grinding the bulk of the weld with a 3M 1991 stone.
After final grind with a 3" roloc
