The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*MJF* · 07-08-2003, 12:14 PM

There are plates tacked underneath the truck with bolts welded to them. The cage is easily removeable. All you have to do is unbolt it from the top & get a few buddies to help lift it out. It also goes back in easily since the plates are welded underneath.

That was one of the things I specifically requested was that it was easy to remove & reinstall without needing one person under the truck holding a wrench on the nut.

07-08-2003, 12:14 PM	#5
MJF No longer truckless Join Date: Mar 2002 Location: Campbell, CA Posts: 299	There are plates tacked underneath the truck with bolts welded to them. The cage is easily removeable. All you have to do is unbolt it from the top & get a few buddies to help lift it out. It also goes back in easily since the plates are welded underneath. That was one of the things I specifically requested was that it was easy to remove & reinstall without needing one person under the truck holding a wrench on the nut. Last edited by MJF; 07-14-2003 at 09:13 PM.