The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - ** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built.

drewskiren · 03-01-2011, 02:32 AM

I made a little sketch in the shop of what is going on so I wouldn't have a brain lapse. Welded the plate and the supplied brackets together and then carefully clamped them in the right position on the frame and welded that together. I will end up with another small piece welded to the outboard side, but I haven't designed that yet. Last shot shows how the arms will end up looking. Now I just need my axle back to locate the panhard rod and airbag mounts.

03-01-2011, 02:32 AM	#697
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I made a little sketch in the shop of what is going on so I wouldn't have a brain lapse. Welded the plate and the supplied brackets together and then carefully clamped them in the right position on the frame and welded that together. I will end up with another small piece welded to the outboard side, but I haven't designed that yet. Last shot shows how the arms will end up looking. Now I just need my axle back to locate the panhard rod and airbag mounts. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife! Last edited by drewskiren; 03-03-2011 at 03:15 PM.