The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BR3W CITY · 03-02-2011, 11:21 AM

if your using a 4l60 or 4l80 just let the computer handle the tranny, since you'll have to have it to run the motor. If your running a carbed setup, then you would need a trans controller if you wanted to run the 4l60 or 4l80 (without a full manual vb). Otherwise with a th350,400, 700r4 or 200r4 you wouldn't need a trans control.

03-02-2011, 11:21 AM	#3
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Standalone trans controller. Anyone? if your using a 4l60 or 4l80 just let the computer handle the tranny, since you'll have to have it to run the motor. If your running a carbed setup, then you would need a trans controller if you wanted to run the 4l60 or 4l80 (without a full manual vb). Otherwise with a th350,400, 700r4 or 200r4 you wouldn't need a trans control. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD