|
Re: HEI Wiring
Nope pretty straight forward. start from the top and work your way down. Pull your accessories and brackets first. then pull the distributor and wires and wiring. valve covers. Then your intake and carb and unbolt the offending sides exhaust manifold and loosen your rockers and pull the push rods and then take out all your bolts holding your head on. Clean head surface run a straight edge from corner to corner to check for warping (usually not an issue) check combustion chamber for cracks and then reinstall with new gaskets.
__________________
A computer once beat me at chess, but it was no match for me at kick boxing.
Duct tape is like the force. It has a light side, a dark side, and it holds the world together.
|