View Single Post
Old 03-10-2011, 11:18 AM   #3
jonzcustomshop
1961 crewcab
 
jonzcustomshop's Avatar
 
Join Date: Dec 2007
Location: missoula, mt
Posts: 6,164
Re: removing bed panels

Its a ton of work, but, you take all the bolts off on the inside edge of the bed/holding the wood.

under the wheel well there are bolts holding the tub to the bed.
there are blts holding the front to the front bed panel

there are 4 bolts holding it to the rear cross sill, underneth.

take the tailgate off, and in the corner under the t/g trunion there are 2 factory weld beads that need to be cut, I use a angle grinder with a big disk to reach, but have had luck with a chisel, or a hacksaw in a pinch.
jonzcustomshop is offline   Reply With Quote