Ok here ya go, they are still on the truck and outside so they have some surface rust.
The first two are the front bracket it has the spring hanger as well as the mount for the radiator support. You may have to adjust the radiator support as I never had the front clip on the truck with these installed. For the rear of the front spring you will need to get the piece from a 73 - 87 truck. Four rivets each side and then place these in position on your truck, they should be able to be found at any local junk yard. We had some but they may have got tossed as we did a scrap metal run not to long ago, I will look if you want these.
This pic is the front hanger for the rear spring
This is shackle flip for the rear, I think i may still have the ones me made for the non flip but they may have went with the scrap metal. Again I can look if you are interested.
