The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dccarpenter · 03-16-2011, 09:29 PM

I got the $30 Might Vac kit from Autozone tonight, going to try it out tomorrow. Hopefully it'll do the trick. Thanks for the advice!

Hopefully it isn't the lines swapped on the valve since the two ports use different fittings, I'd have to cut the lines, swap fittings, and flare the ends to make it work if so...trying to avoid the compression union temptation.

03-16-2011, 09:29 PM	#6
dccarpenter Registered User Join Date: Jun 2009 Location: Washington, dC Posts: 176	Re: No Pressure to Rear Brakes I got the $30 Might Vac kit from Autozone tonight, going to try it out tomorrow. Hopefully it'll do the trick. Thanks for the advice! Hopefully it isn't the lines swapped on the valve since the two ports use different fittings, I'd have to cut the lines, swap fittings, and flare the ends to make it work if so...trying to avoid the compression union temptation. Last edited by dccarpenter; 03-16-2011 at 09:32 PM.