The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

kfreeman1966 · 03-18-2011, 05:29 PM

I checked them and the are rubbing the pads when I turn them. I have also spoken with another guy, and he said to check the vacuum when the motor is at 2500 RPM. I did and still no luck. .... I bleed the line into a bottle of fluid bubbles come out I shut it down when the bubbles disappear. I do this on all 4 wheels. I have a really hard pedal, I start it up and the pedal goes right to the floor. I start over bleeding and bubbles come out.....I've done this process about 6-8 times.... UUUGGGGHHHH!!!!!!!

Can you say frustration!!!

Keith

03-18-2011, 05:29 PM	#5
kfreeman1966 Registered User Join Date: Jul 2010 Location: Winston, Ga. Posts: 42	Re: Brake System Troubles I checked them and the are rubbing the pads when I turn them. I have also spoken with another guy, and he said to check the vacuum when the motor is at 2500 RPM. I did and still no luck. .... I bleed the line into a bottle of fluid bubbles come out I shut it down when the bubbles disappear. I do this on all 4 wheels. I have a really hard pedal, I start it up and the pedal goes right to the floor. I start over bleeding and bubbles come out.....I've done this process about 6-8 times.... UUUGGGGHHHH!!!!!!! Can you say frustration!!! Keith