The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**old Rusty C10** · 03-23-2011, 03:41 PM

I used a dremel wi th a cut off wheel and gouged ravines into the rivets then a hammer and chisel... i found that with my cheap compressor we didnt get enough air power to blast em off that way

03-23-2011, 03:41 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,345	Re: hanger rivets I used a dremel wi th a cut off wheel and gouged ravines into the rivets then a hammer and chisel... i found that with my cheap compressor we didnt get enough air power to blast em off that way __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!