The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

lilpoindexter · 03-24-2011, 08:27 PM

I have a DJM rear flip kit , djm front springs and summit brand spindles.
The quality of all of the parts is fine. the outside bolts for the shock relocators on the back don't clear the leaf spring mounts on the outside, so only 2 bolts (instead of 3) hold the shock extensions to the axle.
The DJM stuff has a hammered silver powder coat finish, which I realized I don't like the looks of.
The summit brand (groundforce) spindles are fine, no complaints at all.

03-24-2011, 08:27 PM	#2
lilpoindexter Registered User Join Date: Sep 2010 Location: los angeles Posts: 1,136	Re: Thoughts on McGauphys lowering kits? I have a DJM rear flip kit , djm front springs and summit brand spindles. The quality of all of the parts is fine. the outside bolts for the shock relocators on the back don't clear the leaf spring mounts on the outside, so only 2 bolts (instead of 3) hold the shock extensions to the axle. The DJM stuff has a hammered silver powder coat finish, which I realized I don't like the looks of. The summit brand (groundforce) spindles are fine, no complaints at all.