[Melmann]

I installed my poppers like dustinjames showed in his response. I am satisfied with the autoloc 50,s. This installation keeps the system out of the weather. I will also place a vapor barrier on the door before I install the panels. You will also need to change out the bar on the inside door opener. They will bend if you don't remove them, use the bike cable setup on door latch. I used the screw type connector to secure the cable loop for future adjustment if necessary. I set mine up similar to Tow Me,s attachment document. You can get the lug at Home Depot in the electrical dept. They are for a #6 ground in a breaker box.