The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

rayfinseats · 04-04-2011, 08:36 AM

If they are the same series (years) it should be pretty easy. You may need different U-joints and you will need to check the drive shaft lengths and may need a brake job. There is a TON of info on the web about that swap. Should be pretty easy.

04-04-2011, 08:36 AM	#2
rayfinseats Registered User Join Date: Dec 2010 Location: sioux city, iowa Posts: 619	Re: 1/2 ton to 3/4 ton axle swap If they are the same series (years) it should be pretty easy. You may need different U-joints and you will need to check the drive shaft lengths and may need a brake job. There is a TON of info on the web about that swap. Should be pretty easy. Last edited by rayfinseats; 04-04-2011 at 08:38 AM.