|
Re: fuel system questions and issues.
1. You can/could soak then injectors in something like seafoam to see if it helps de-varnish them. There are also a large number of companies who will professionally clean and flow your injectors.
2. Make sure you have the right sizes (the 3/8ths will fit and kind of "snap" over the 5/16ths line, but not tightly. I almost did this when hooking mine up). Also make sure the plastic peice inside of the fitting isn't broken. You probably just had a bad fitting but better to be safe.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING 
|