The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Swapped to wolverine hubs,something slipping/grinding

**argonaut** · 04-04-2011, 03:58 PM

With a np 203 you'll need to leave the front hubs locked all the time until you get a kit to convert it. if you leave the hubs unlocked and put the transfer case in 4-Lock you'll put undo wear on the transfer case.
Whatever the problem is it sounds like you're going to need to drop the T-case out and open it up.

04-04-2011, 03:58 PM	#4
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Swapped to wolverine hubs,something slipping/grinding With a np 203 you'll need to leave the front hubs locked all the time until you get a kit to convert it. if you leave the hubs unlocked and put the transfer case in 4-Lock you'll put undo wear on the transfer case. Whatever the problem is it sounds like you're going to need to drop the T-case out and open it up. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!