[SCOTI]

Originally Posted by gringoloco

....I am not particularly happy with how my welds are looking on this exhaust- the beads seem to want to 'build-up' on me- I'll hafta play with the settings some when I finish weld the over-axle pipes...

Included a few pics of the hangers I'll be using. They're called 'Snappers'. I used them once before, on my Blazer (the red ones) and liked them, so I picked up four more to use on rear sections. They're blue 'cause the red ones were $5 each- the blue $2 on eBay

I've been having the same problem. I slowed the wire speed to the point where it wanted to melt itself to the tip. Speed it up enough to compensate & I get more 'peak' on the weld than desired. I didn't get a chance to try another gas mix to see if there might be some improvement.

Do you have a link for the hanger bushings? I know of one source but other choices aren't a bad thing .