|
Re: HOW TO: Split the brake lines (many have asked)
Quote:
Originally Posted by ChiefRocka
We are good .... Ive been going a serious of bad luck, but Im bouncing back slowly !!
 |
you are not alone on that if it isnt one thing it is another. Hang in there
Back to the original post: my oe push rod was about 1/4 to short when fully addjusted due to the fact that I used an adapter for the master cylinder as a 60 used a 3 bolt set up and not 2. I ordered an addustable push rod from speedway it was 3/8 thred ,I used the part off of my old clutch master that attaches to the pedal, worked perfect !
Check to see if your push rod is addjustable it may work as is .
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes.
"Over, Around or through it... "
Last edited by slepysal; 04-23-2011 at 12:40 PM.
|