The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rabunjeeper · 04-25-2011, 07:02 PM

Not the same project as yours but i jst put a s10 body on a k5 4wd fullsize frame and i used a steering shaft from a mid 80s jeep cherokee xj. It has a u joint on each end and will bolt to the gm steering box. The other end i had to make a bracket and weld it to my s10 column. It will work on extreme angles and it has a fairly long slip joint in the middle of it.

04-25-2011, 07:02 PM	#2
Rabunjeeper Registered User Join Date: Apr 2011 Location: Clayton Ga Posts: 8	Re: AD Steering Column to S10 Box? Not the same project as yours but i jst put a s10 body on a k5 4wd fullsize frame and i used a steering shaft from a mid 80s jeep cherokee xj. It has a u joint on each end and will bolt to the gm steering box. The other end i had to make a bracket and weld it to my s10 column. It will work on extreme angles and it has a fairly long slip joint in the middle of it. Last edited by Rabunjeeper; 04-25-2011 at 07:03 PM.