The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - EZ-Chassis Kit 2'' Drop..But Want To Go Lower

Dan Bowles · 04-28-2011, 07:54 PM

Look for SgtUSMC's build to see what he did. I'm pretty sure that's his truck on his list there. I think if he wants it that low, he's not going to be happy with a kit. The steering box is really in the way. You'll need to be where BlueJeep suggests. 3.5" from the frame. Ours is 5" from the frame and we are at about 8" from running board to ground on our '54 with no spindle drop. It may also matter if you have 4 cyl vs 6 cyl springs. We've got 3" blocks in the rear.

04-28-2011, 07:54 PM	#3
Dan Bowles AD Addict Join Date: Oct 2009 Location: Blissfield, MI Posts: 822	Re: EZ-Chassis Kit 2'' Drop..But Want To Go Lower Look for SgtUSMC's build to see what he did. I'm pretty sure that's his truck on his list there. I think if he wants it that low, he's not going to be happy with a kit. The steering box is really in the way. You'll need to be where BlueJeep suggests. 3.5" from the frame. Ours is 5" from the frame and we are at about 8" from running board to ground on our '54 with no spindle drop. It may also matter if you have 4 cyl vs 6 cyl springs. We've got 3" blocks in the rear.