View Single Post
Old 05-03-2011, 10:48 PM   #6
pheengurs
Registered User
 
pheengurs's Avatar
 
Join Date: Jul 2006
Location: Calgary, Alberta, Canada
Posts: 134
Re: 64 K10 horizontal booster & master cylinder upgrade to mate with corp 10 bolt fro

64fleetside, is your 80's C10 master cylinder the all metal kind or the kind with the plastic resovoir? is it an early 80's master cylinder? feel free to post a pic of your setup here...

how did you get them to mate up?
did you have to mess with the rod between the booster and the master cylinder?
do you have that same horizontal bracket, too?

the master cylinder that's stock for 1987 setup that I bought to match the corp 10 axle & brakes is a plastic kind. I just checked the rear of it, that's supposed to go into the front of the booster -- and it definitely won't fit on the stock 1964 booster. I compared the ends and not only is the diameter of the 'bore'??? too large, but the depth of the 'bore'??? is too shallow.

in the post I quoted earlier, Joe321 said he's got a master cylinder from a 1971 and a booster from a 66. But no further details...
__________________
1964 K10 shortbox Stepside
383 sbc stroker under vortec heads
sm420 trans / t221 tcase / corp 10 front axle / corp 12 rear axle / 3.73 gears
rolling on 33x12x15 tires on 6 lug rims.
pheengurs is offline   Reply With Quote