Either two wheel or 4 wheel drive "z" bar will work for you. When I compared the two wheel drive with the four wheel drive, the only difference that I could tell was that the four wheel drive "tube" was approximately 1/8" longer so that it went onto the ball further by that amount. As far as they normally go onto the ball, that is pretty insignificant. The difference that I noticed could be attributed to other factors, (different manufacturer, maybe).
The big differences in the clutch linkage between the two are the clutch rod is shorter on the four wheel drive and the location of the pivot ball is different,(to make up the differences in engine locations).
Jim
|