The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Tony@AirRideTech · 05-10-2011, 11:27 AM

Being that you are running a rear end out of a 454SS ( 14bolt Semi Float), you will not find anything that will be a complete piece of cake type bolt on system. Our bolt on kit is a super nice piece but our Panhard bar bracket is designed for either a GM Corp 10Bolt or 12 Bolt. So if you used our kit you would have to used a weld on Panhard bar axle bracket, you would have to enlarge the axle clam shell axle brackets for the larger diameter axle tube and you would need to weld the coil over mounts on. Not really too bad of a deal but there will be a little work to it.

05-10-2011, 11:27 AM	#14
Tony@AirRideTech Junior Member Join Date: Feb 2005 Location: Huntingburg IN Posts: 620	Re: 4 Link Rear Bolt On. Being that you are running a rear end out of a 454SS ( 14bolt Semi Float), you will not find anything that will be a complete piece of cake type bolt on system. Our bolt on kit is a super nice piece but our Panhard bar bracket is designed for either a GM Corp 10Bolt or 12 Bolt. So if you used our kit you would have to used a weld on Panhard bar axle bracket, you would have to enlarge the axle clam shell axle brackets for the larger diameter axle tube and you would need to weld the coil over mounts on. Not really too bad of a deal but there will be a little work to it.