The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

XtechX · 05-15-2011, 01:45 AM

I put 1972 1/2 ton stock spindles onto my 1965, I also used the 72 lca's simply because they were already painted and looked nice but didnt see any reason that I had to change them to make it work correctly. Everything else on the front end is stock 1965. My question is...Did I do it right??? Everything seems to have bolted right up and the ball joints fit. I also added a power steering box to it out of a 1983 chevy 1/2 ton. Any suggestions or comment would be appreciated...thanks.

05-15-2011, 01:45 AM	#1
XtechX Registered User Join Date: Jan 2011 Location: Edmore, Michigan Posts: 300	72 spindles on a 65 I put 1972 1/2 ton stock spindles onto my 1965, I also used the 72 lca's simply because they were already painted and looked nice but didnt see any reason that I had to change them to make it work correctly. Everything else on the front end is stock 1965. My question is...Did I do it right??? Everything seems to have bolted right up and the ball joints fit. I also added a power steering box to it out of a 1983 chevy 1/2 ton. Any suggestions or comment would be appreciated...thanks. __________________ Opportunity usually comes disguised....As hard work!!!